Welcome to Henan Global Heavy Industry Technology Co. , Ltd.
Pcz Heavy Hammer crusher
Feed:≤1200mm
Produce:100-3000t/h
Materials:Limestone, coal gangue, river pebbles, granite, basalt, iron ore, quartz stone, construction waste and so on
- Preponderance：PCZ Heavy Hammer crusher is the impact of high-speed operation of the hammer and materials and broken materials. It can reduce the cost by about 40% , and has the advantages of large crushing ratio, high output, uniform product size, low energy consumptio
Contact us：+8619303970888
Introduction of pcz Heavy Hammer crusher
PCZ Heavy Hammer crusher is also called heavy hammer crusher. During the operation of the equipment, materials are crushed by the impact of the high-speed Hammer body and materials, the utility model has the advantages of simple structure, one-step forming, large crushing ratio, small product size and high production efficiency, and can be broken in both dry and wet forms, it is suitable for fine crushing of medium hardness and brittle materials in mines, cement, coal, building materials, burning and so on. The gap between hammer head and liner can be adjusted according to the requirements of users, and the size of material can be changed to meet the needs of different users.
Performance Advantages
The crushing ratio is big, the finished product grain type is good
Big Feed size, small discharge size, material can be adjusted according to demand for coarse, medium, fine and other specifications, no sheet, no smooth body, multi-angle multi-edge to ensure compression strength.
Low running cost and low investment
Heavy-duty Hammer crusher has a one-time forming, no need to carry out the two-stage crushing and shaping process, completely realized the low-cost operation, can reduce the cost of about 40% .
Long Service Life
The Hammer head of the heavy hammer crusher can rotate at 360 ° , which increases the elasticity of the hammer head, and makes the hammer handle not easily break when it is impacted by a large piece of material or a slightly higher hardness material, thus increasing the service life of the hammer head.
Energy Conservation, environmental protection and pollution reduction
Heavy Hammer crusher can be used for dry and wet crushing, wet material can be broken when water to reduce dust pollution to the environment.
Working principle of pcz heavy hammer crusher
Large Hammer breaking is the use of impact to break the material. The main working part is a rotor with a hammer head. The rotor is composed of a spindle, a disk, a pin shaft and a hammer head. The motor drives the rotor to rotate in the crushing chamber at high speed. The material enters the machine from the upper feeding port and is crushed by the impact, impact and grinding of the hammer head. The lower part of the rotor is provided with a sieve plate, through which the particle size smaller than the size of the sieve hole is discharged, and the coarse particle size larger than the size of the sieve hole is retained on the sieve plate, which continues to be hit and ground by the hammer and discharged through the sieve plate.
Technical parameter
| Types | Specifications | Feed in(mm) | Feed port(mm) | capacity(t/h) | Motor power(kw) | External form(mm) |
| PCZ1308 | 1310X790 | 850X800 | ≤500 | 100-160 | 132kw-4 | 2818×2100×2390 |
| PCZ1512 | 1500X950 | 1200X900 | ≤600 | 250-400 | (160kw-4)*2 | 3220×2520×2800 |
| PCZ1615 | 1500X1160 | 1480X1200 | ≤650 | 400-800 | (220kw-4)*2 | 3665×2915×3440 |
| PCZ1620 | 1660X1900 | 2000X1200 | ≤1200 | 800-1000 | 400KW*2 | 3500×3100×3200 |
| PCZ1820 | 1800X1964 | 2000X1200 | ≤800 | 800-1500 | 800KW-6 | 3474×3822×3520 |
| PCZ2125 | 2100X2486 | 2600X1960 | ≤1200 | 2000-3000 | 1250KW-6 | 5057×4565×4666 |
| Types | Specifications | Feed in(mm) | Feed port(mm) | capacity(t/h) | Motor power(kw) | External form(mm) |
| PCZ0706 | 700x570 | 618x510 | ≤400 | 75 | 50-70 | 1950x1340x1480 |
| PCZ0808 | 800x750 | 780x610 | ≤500 | 132 | 80-100 | 2280x1790x1670 |
| PCZ0910 | 900x1000 | 1070x750 | ≤600 | 150-200 | (110kw-4)*2 | 2600x2200x2050 |
| PCZ1012 | 1000x1180 | 1255x810 | ≤200 | 250-300 | (132kw-4)*2 | 2800x2400x2300 |
| PCZ1213 | 1200x1280 | 1350x900 | ≤200 | 300-350 | (160kw-4)*2 | 2970x2625x2580 |
| PCZ1216 | 1270x1490 | 1530x920 | ≤250 | 400-500 | (200kw-4)*2 | 3070x2840x2580 |
| PCZ1220 | 1220x1950 | 2000x920 | ≤250 | 500-700 | (250kw-4)*2 | 3080x2280x2580 |
| PCZ1622 | 1580x2150 | 2290x960 | ≤300 | 600-900 | 630kw-6 | 4095x3495x2960 |
| Model | Feeding port(mm) | Production capacity(t/h) |
| PCZ1308 | ≤500 | 100-160 |
| PCZ1512 | ≤600 | 250-400 |
| PCZ1615 | ≤650 | 400-800 |
| PCZ1620 | ≤1200 | 800-1000 |
| PCZ1820 | ≤800 | 800-1500 |
| PCZ2125 | ≤1200 | 2000-3000 |
Related articles
Is there any movement in the large p
2021-07-08
"Pebble crushing is a common raw material in the sand and stone processing industry. Compared with the fixed crushing production line,
Reply
Equipment configuration and price of
2021-07-08
"Sand production line is the production of all kinds of stone, sand, aggregate production lines, from a number of equipment, commonly used sand production
Reply
Mobile crusher operation notes as we
2021-07-08
"Any object to long-term stable use is inseparable from maintenance, in the operation of the time also need to pay more attention, mobile crusher is no exception.
Reply
What are the types of crawler mobile
2021-07-08
"With the continuous progress of science and technology, China's industrial system has undergone a huge leap in development
Reply
Leave a Comment