SD EUROPEAN JAW crusher

Introduction of SD EUROPEAN JAW crusher

SD Europlate Jaw crusher is suitable for crushing ore, rock and slag with compressive strength not higher than 280MPA, and the size of crushed materials shall not be greater than that specified in the technical parameter table. Mainly used in metallurgy, mining, chemical, cement, construction, Refractory and ceramics and other industrial sectors for crushing and fine crushing of a variety of medium-hard ores and rocks. Compared with the traditional jaw crusher, the SD series jaw crusher pays more attention to details in design and manufacturing, adopts high strength materials and new manufacturing technology, has higher structural strength and higher equipment reliability, higher crushing ratio, higher yield, lower overall cost and other advantages. Henan Expo Construction Machinery is a sandstone aggregate and mineral equipment manufacturer that has delivered thousands of crushing, screening, sand making, and mining solutions to customers and enterprises around the world today, developed and produced by the European SD series crusher has become the market attention of the Hubei crusher. When considering the crushing of hard and abrasive materials, the SD series European Hubei crusher with new crushing technology and manufacturing level should be chosen.

Principle of operation of SD European Stone crusher

The crushing mode of the Obelisk crusher is flexure extrusion type. Its working principle is:

The motor drives the belt and Pulley, which swings the jaw back and forth through the eccentric shaft. When the jaw pushes the jaw to move the board, the material is crushed or broken. When the movable Hubei and movable jaw plate retreats under the action of the eccentric shaft and spring, the material which has been crushed or crushed has been discharged from the lower outlet of the jaw plate. With the continuous rotation of the motor, the crusher is powered by Hubei, which periodically crushes and excretes materials to achieve mass production.

Main structure: main frame part, eccentric shaft rotating part, crushing cavity working part, safety device, discharge port adjusting device and so on.

1, the rack part: by the side plate, the Front Box Assembly, the back box welding parts and so on.

2, eccentric shaft rotating part: mainly by moving jaw, eccentric shaft, bearing, bearing housing, belt pulley and other components. Is a major part of the transmission of power.

3, crushing cavity work part: mainly by the fixed jaw plate, moving jaw plate, side lining plate, guard plate and so on, is the work parts of crushing materials.

4, Safety Device: by the Elbow Plate, elbow plate seat, spring, Spring pull rod and so on, is the crusher in the abnormal security role of the parts.

5. Discharge opening adjusting device: the device is used to adjust the size and size of discharge opening and control the discharge size. The utility model is mainly composed of an adjusting fixed inclined block, an adjusting sliding inclined block, a jacking screw bolt, a sliding block locking pull rod, etc. .