Welcome to Henan Global Heavy Industry Technology Co. , Ltd.
Single-tube dryer
Cylinder volume:16.63-81.38m³
Capacity:10-70t/h
Materials:Slag, calcium carbide residue, limestone, clay, river sand, quartz sand, water slag, etc.
- Preponderance：With the characteristics of compact structure, small footprint, low energy consumption, high thermal efficiency, good material drying effect, and easy to achieve automatic control
Contact us：+8619303970888
The cement dryer is composed of an inner cylinder, a middle cylinder, and an outer cylinder, forming a self-insulated circulating structure, so this new of dryer is also called a three-cylinder dryer. The combined three-cylinder dryer has the characteristics of compact structure, small footprint, low energy consumption, high thermal efficiency, drying effect of materials, and easy to achieve automatic control. It is mainly used to dry granular materials within a certain humidity range, such as yellow sand used in the dry powder industry, various specifications of molding sand used in the casting industry, and high furnace slag used in the building materials and cement industry. According to the different requirements of the industry the moisture content of the dried materials, the moisture content of the dried materials can be below 1-0.5%. It is an ideal product for various drying projects
Performance Advantages
Small footprint; low installation cost
The equipment is compact in structure and occupies a small area, which is half of the area of the same yield dryer, the civil construction investment is reduced by about60%, and the installation is convenient.
Good wear resistance; sturdy and durable
The whole machine is made of wear-resistant steel plates, which are 3-4 times more wear-resistant than ordinary steel plates, with low maintenance rate and service life.
Reduce production processes; save costs
The discharge temperature is basically lower than 60 degrees, it can be directly put into the warehouse without entering the cooling shed for cooling, which saves the production process production cost.
Advanced process; energy-saving and environmentally friendly
Adopting new energy-saving technology--embedded structure, as well as a special thermal engineering design concept, eliminating wind tunnel heat loss, increasing heat exchange area unit volume evaporation intensity, energy-saving effect is excellent, it is an environmentally friendly and energy-saving product to replace traditional drying equipment.
Working principle
Materials enter the dryer through the feed device. Since the cylinder is slowly rotating in an inclined state, the materials move from the high end to the low end the axial direction. In the process of movement, the lifting and throwing plate continuously lifts, scatters and moves the materials upward in the circumferential direction, so that the materials can fully exchange heat with the air until they are dried to the specified humidity. The dried materials are discharged from the discharge device.
Technical parameter
| Model | Φ2.0×4m | Φ2.5×5m | Φ2.5×7m | Φ2.7×7m | Φ3.0×7.0m | Φ3.2×7.0m | Φ3.6×8m |
| Diameter(m) | 2 | 2.5 | 2.7 | 3 | 3.2 | 3.6 | |
| length(m) | 4 | 5 | 7 | 8 | |||
| Volume(m³) | 16.63 | 52.678 | 52.678 | 81.38 | |||
| Capacity((T/h)) | Yellow sand15-20 | Yellow sand20-25 | Yellow sand25-30 | Yellow sand30-35 | Yellow sand35-40 | Yellow sand45-50 | Yellow sand65-70 |
| Slag10-15 | Slag15-20 | Slag20-25 | Slag25-30 | Slag30-35 | Slag35-40 | Slag60-65 | |
| Motor | Y2-132m-4E | Y2-132m-4E | Y2-132m-4E | Y2-132m-4E | Y2-160m-4 | Y2-160m-4 | Y2-160m-4 |
| Power(kw) | 4×2 | 5.5×2 | 7.5×2 | 11×2 | 7.5×4 | 7.5×4 | 15×4 |
| Reducer type | XWD7-23-11 | XWD6-23-7.5KW | XWD8-23-15KW | ||||
| Reducer transmission ratio | 29 | ||||||
| Speed(rpm) | 4-10 | ||||||
| Maximum moisture(%) | 10-12 | ||||||
| Finished moisture(%) | 1 | ||||||
| Maximum moisture of sand(%) | 8-10 | ||||||
| Final moisture of sand(%) | 0.5-1 | ||||||
| Highest temperature(℃) | 700-750℃ | ||||||
Related articles
Is there any movement in the large p
2021-07-08
"Pebble crushing is a common raw material in the sand and stone processing industry. Compared with the fixed crushing production line,
Reply
Equipment configuration and price of
2021-07-08
"Sand production line is the production of all kinds of stone, sand, aggregate production lines, from a number of equipment, commonly used sand production
Reply
Mobile crusher operation notes as we
2021-07-08
"Any object to long-term stable use is inseparable from maintenance, in the operation of the time also need to pay more attention, mobile crusher is no exception.
Reply
What are the types of crawler mobile
2021-07-08
"With the continuous progress of science and technology, China's industrial system has undergone a huge leap in development
Reply
Leave a Comment